Grille used on some GE microwave models.
Directly Replaces: WB07X10476, AP3418725, 910708, AH229619, EA229619, PS229619, WB7X10476.
- Approx. 25"W x 3.5"H.
- Stainless steel.
Compatible with the following models:
The part arrived in a damaged box. Preparing for the worst, I took photos of every step of the unboxing. Thankfully. the grille was in one piece and had no issues.
Installation of the product will require you to still have the original screws as none are included. Also, the screw holes do not line up with those on the microwave - this means you will either need to slightly widen the holes either on the microwave or on the plastic part of the grille. The plastic parts of this grill are prone to cracking and malfunctioning, especially along the spring-loaded hinges, after you have had the item installed a few years. Expect to need to replace the part again and again unless someone makes a metal-reinforced version of the entire area where the hinge connects to the springs.
When installing, be sure to be careful about lining up the lower grill tabs and the upper grill connections. You will need to slide the whole thing to the right once you have successfully put the grill into place. If you force any of the tabs THEY WILL BREAK.
All-in-all, this is a good replacement that can be readily installed by the consumer if a little care is taken throughout the installation.